Mike,
Thanks for the information! Reading the OD data below, I'm affraid the
cable I found is yet smaller then these. I measured 0.2" OD (including the
jacket). Could it be the HPTG1200I or the HPTG2100I?
P.S: thanks for many QSOs in 1988 Kingman Reef DXpedition (K9AJ/KH5K).
73 de Roger PY1OL
At 10:43 1/12/2002 -0600, you wrote:
>Hello Roger,
>
>I guyed my tower w/ Phillystran in 1984 (still up & still going
>strong!). I dug out the Phillystran spec sheet from that project. This
>was before Phillystran changed the jackets and terminations, so this info
>is likely applicable to the material you found:
>
>
>Part Number EHS equiv OD Break Strength Jacketed
>weight/1,000'
>
>HPTG 4000 3/16" 0.25" 4,000
>pounds 21 pounds
>HPTG 6700 1/4" 0.31" 6,700
>pounds 34 pounds
>HPTG 11200 5/16" 0.42" 11,200
>pounds 55 pounds
>
>I have data up to HPTG 58300 (0.92"od) but sounds like your material might
>one of the above.
>
>73's....Mike/K9AJ
|