Towertalk
[Top] [All Lists]

[TowerTalk] screw-in guy anchors, was Could this happen to you

To: <towertalk@contesting.com>
Subject: [TowerTalk] screw-in guy anchors, was Could this happen to you
From: rmoodyg@bellsouth.net (Richard M. Gillingham)
Date: Tue Mar 4 12:42:40 2003
BTW, Has anybody actually contacted this guy to advise him of the error(s)
of his ways??

W1RG
----- Original Message -----
From: "Jon Ogden" <na9d@speakeasy.net>
To: <w3wv@att.net>; "Doug Renwick" <VE5RA@sasktel.net>
Cc: <towertalk@contesting.com>
Sent: Tuesday, March 04, 2003 12:20 PM
Subject: Re: [TowerTalk] screw-in guy anchors, was Could this happen to you


> on 3/4/03 10:39 AM, w3wv@att.net at w3wv@att.net wrote:
>
> > Beating up on people almost never works nearly as well as treating them
as if
> > they are doing the best they can at the time; after all, they are.
Aren't
> > you?  Even when *you* do "dumb things?"
>
> Beating up on people doesn't work unless they willfully do the same thing
> after being instructed properly.
>
> However, treating them as though they are doing their best all the time is
a
> recipe for failure as well.  I always expect people to be able to do
better
> than they do.  I think that not properly consulting engineering manuals
and
> not properly examining forces and loads before putting up a tower is NOT
> doing your best.  It's called making short cuts.  I don't think he was
> putting forth his best effort when he put that tower up.  Nothing can
> convince me otherwise.  Not thinking and using cheap hardware is NOT doing
> your best.  One has to be careful when putting up something that you can
get
> killed or kill someone else with.  There is NO excuse for not getting
> properly educated.
>
> That said, calling him a dumb a** won't help.  Giving him a little
guidance
> and elmering will.  However, I'm afraid he still hasn't learned his lesson
> as he is using the same anchors and the same turnbuckles.  Next time, it
> won't be saturated soil, but perhaps a tornado or other strong wind that
> will cause his hardware to fail.  The amount of forces on a 150 tower are
> big.  Look at the Rohn spec sheets.  I have bigger hardware than he does
on
> my 53 footer.
>
> And this guy has a link on his web page on tower safety!  Come on.  If he
> goes through the trouble to talk about tower safety on his web page, he
> could have read up and asked questions about the sort of hardware to use.
>
> We have to be honest with people when they do dumb things, but nicely.
It's
> clear that this guy put up his tower as an amateur radio operator in the
> true spirit of the word "amateur."  Lack of planning is not doing one's
> best.  I refuse to accept mediocrity in anyone.
>
> 73,
>
> Jon
> NA9D
>
> -------------------------------------
> Jon Ogden
> NA9D (ex: KE9NA)
>
> Citizen of the People's Democratic Republik of Illinois
>
> Life Member: ARRL, NRA
> Member:  AMSAT, DXCC
>
> http://www.qsl.net/na9d   <- Updated on 1/22/03!!!
>
> "A life lived in fear is a life half lived."
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>