FWIW, I've always used the slowest speed. I've just assumed that by
generating less torque would keep the rotor & antenna systems happier over
the long run.
--Mike, WQ5C
At 06:31 AM 4/14/03, Sylvan Katz wrote:
> > There is another pin - pin 3 - that controls the speed the rotor turns. I
> > have that disconnected at present, and the rotor turns at the slowest ("oh
> > so slow") speed.
> > Does anyone know what to do with pin 3 to make the rotor turn at a faster
>speed?
>
>
>Please pass this information on if you get it. I have a G-1000DXA with the
>same configuration. I emailed Yaesu a dozen times starting Nov 10, 2002.
>They have never answered my email. I called the tech line at least four
>times. Each time they promised to get back to me with an answer. And they
>have never gotten back to me. This information appears to be a closely
>guarded secret.
>
>GL
>... Sylvan
>
>Sylvan Katz, VE5ZX
>Saskatoon, SK
>
>
>
>
>_______________________________________________
>
>See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
>Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
|