Hi Bill,
As another ham mentioned, I have also pulled up a 100 ft of Rohn 65G at one
time, but in the middle of the Alaskan arctic winter of 1998. This was done
at a new ARCO Alaska oil field called "Alpine" located just north of
Nuiqsut, Alaska (look that one up). It was February, and the temp was -25
deg F with the wind blowing around 20 to 25 mph by the end of the day. The
100 ft crane picked it between the 2/3 to 3/4 point and set it on the pier
pin quite easily - only a minimum of sag was noted. By late afternoon, we
had the two sets of guys tensioned, and had one of the younger guys skinny
up the tower to undo the crane's straps. This was a good thing, because the
crane operator was getting worried about his fully extended boom swaying the
way it was as the winds picked up at end of the day.
Oh, the stories I can tell about working in the arctic for the oil companies
and the trans-Alaska pipeline on Alaska's North Slope. It's always a
challenge for those of us in the telecommunications biz.
Steven Gehring
Bothell, WA 98012-7252
E-mail: kz9g@arrl.net
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Cqtestk4xs@aol.com
Sent: Friday, May 02, 2003 3:32 PM
To: TOWERTALK@contesting.com
Subject: [TowerTalk] Erecting Rohn 55 and 65
I have had the good fortune to come across some really nice inexpesnsive
Rohn
65 as well as some decent 55. Rohn 65 of course is pretty
industrial-strength sized tower to erect by the average ham and is beyond
the
capacity of the ordinary gin pole.
I would like to erect as tall a tower made of 65 as I can up to 200 feet.
However, I do not intend to put up the tower piece by piece. What I I would
like to do is put it up in one total piece by crane. One of the locals put
up a 180 foot tower of Rohn 55 this way. I was amazed that he was going to
do this but he did it....all 180 feet. Incredible! No way am I going to
replicate that feat with Rohn 55. However, I am curious as to what the guys
who have worked with 65 think.
What is the maximum height that one continuous length of Rohn 65 tower could
be 'walked up' and set by crane on top of the stub sticking out of the
ground? We're assuming of course, a crane would have no problem with the
total weight of the tower. The guys would be attached to the tower ahead of
time and taped to the sides during lifting and put in place before the tower
was climbed to release the hook. The reason I don't want to do it in two
pieces is that it would require a much taller crane....more bucks! LXC and
others, any ideas?
Bill K4XS
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|