Towertalk
[Top] [All Lists]

[TowerTalk] Concrete "Slump"

To: <towertalk@contesting.com>
Subject: [TowerTalk] Concrete "Slump"
From: kk9a@arrl.net (kk9a@arrl.net)
Date: Thu May 29 17:52:40 2003
Is anyone aware of tower failure due to inadequate concrete strength?   I've
always ordered the standard 5 bag mix.

John

----- Original Message -----
From: <K7LXC@aol.com>
To: <tombaugh@discoverynet.com>; <towertalk@contesting.com>;
<k6rix@arrl.net>
Sent: Thursday, May 29, 2003 21:21
Subject: Re: [TowerTalk] Concrete "Slump"


In a message dated 5/29/03 12:32:34 PM Pacific Daylight Time,
tombaugh@discoverynet.com writes:

> The cost of 3500 pound or even 4000 Pound mix is not significant in the
>  large scheme (guessing $1 / yd). The pour is a relatively small and the
>  price will be proportionately small. We pour 4000 pound concrete almost
>  exclusively. YES it is overkill! However, the tradeoff is in workability.
>  Stronger concrete has more of the expensive stuff.. the glue.. the
Portland
>  Cement and that is what makes the mixure "creamy" and easy to work. Too
much
>  water can "appear" to give these properties but good concrete is good
>  concrete. Add water and increase slump (good description below). but good
>  concrete (4000 pound mix) will have a good slump (lower number) because
it
>  has more GLUE.

    Another reason for using 4000# mix is that it'll cure to the specified
3000# fairly quickly - in a couple of days. This means you can load the base
much earlier than waiting for the 3000# mix to cure to 3000#.

Cheers,
Steve     K7LXC
TOWER TECH -
Professional tower services for commercial and amateur
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



<Prev in Thread] Current Thread [Next in Thread>