Andy,
You just simply pull rope through the aluminum tubing elements and cut it to
length. You might secure the ends so the rope doesn't come out or bunch up
in an end.
Mike W9RE
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com]On Behalf Of VeeAthreePL
> Sent: Friday, August 08, 2003 12:41 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Antenna element vibration damping - How
>
>
> I have had read somewhere on this reflector that in order to damp element
> vibration in the wind you have to insert rope inside the elements.
> I am just about to install my Mosley TA36 with 40M kit and would like to
> install such a modification. How it is done exactly?
> Thanks
> 73 de Andy - VA3PL
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers",
> "Wireless Weather Stations", and lot's more. Call Toll Free,
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|