Towertalk
[Top] [All Lists]

[TowerTalk] Sunlight protection for fiberglass

To: <towertalk@contesting.com>
Subject: [TowerTalk] Sunlight protection for fiberglass
From: k2xx@swva.net (Joe Giacobello)
Date: Mon Aug 18 11:37:47 2003
Mike, if you go to the MaxGain quad website, I believe they make 
recommendations for painting quad spreaders to protect  them from the 
effects of UV exposure.

73, Joe

Mike Gilmer - N2MG wrote:

>I have a used M2 40M3L antenna that I am putting back 
>together and I noticed that the fiberglass insulating 
>parts are starting to "fray" - i.e., the glass fibers 
>are separating somewhat, giving the surface a "fuzzy" 
>feel.  I suspect UV is the cause.
>
>I would like to protect the fiberglass from further 
>damage.  I considered using 3M #88 electrical tape as 
>a "wrap", but is there something more suitable for 
>this?
>
>Mike N2MG
>
>________________________________________________
>PeoplePC:  It's for people. And it's just smart. 
>http://www.peoplepc.com 
>_______________________________________________
>
>See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
>Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any 
>questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>  
>


<Prev in Thread] Current Thread [Next in Thread>