I had to replace the connector from the rotor cable which has six wires
connected to it. I looked at the schematic of the rotator and it only showed 4
wires were required. Next I pulled the cover on the control box and sure enough
there were only 4 wires used on the female part of the connector. The manual
shows 6 wires connected. Is their any need for the additional 2 wires?
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|