Towertalk
[Top] [All Lists]

[TowerTalk] Rohn 25 Rotor Shelf Mounting

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rohn 25 Rotor Shelf Mounting
From: "Jack S Schuster" <w1wef@c4.net>
Date: Sat, 30 Aug 2003 14:45:03 -0400
List-post: <mailto:towertalk@contesting.com>
I was planning on mounting my AS25 Rotor shelf  halfway down a straight
section here on  Cape Cod  where I'm reworking my tower, but to my surprise
the shelf wont fit  halfway down! I dont recall if I had to cut out
diagonals to do the same thing in Ct, and never ran into this before. Am I
missing something? I know I've heard of cutting out diagonals to get a prop
pitch to fit...    JACK W1WEF


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>