An OR2800 M2 rotator can be squeezed in at the bottom of the top section
of Rohn 25 by removing the lowest horizontal brace from one side. This
leaves enough space to slide the rotator inside with a little effort. This
brace can be replaced with a piece of flat bar 1/4" X 1" held by "U bolts".
This will weaken the original strength perhaps so take this into
consideration. Also you will see that the mast clamp bolts will be a little
difficult to secure unless you have a universal socket on an extension.
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|