To: | Jim W7RY <w7ry@centurytel.net> |
---|---|
Subject: | Re: [TowerTalk] How do you cut this stuff? |
From: | "Jim White, K4OJ" <k4oj@tampabay.rr.com> |
Reply-to: | k4oj@tampabay.rr.com |
Date: | Sat, 04 Oct 2003 22:49:08 -0400 |
List-post: | <mailto:towertalk@contesting.com> |
Go with the grinder - although a big bolt cutter works well, too... The local flea market vendor who has the Asian import stuff sells side grinders for 9.99 - and a disk is another buck -= just burned out one of those after three years of occasional usage for ham applications... i.e. for about 4 dollars a year I ground through whatever needed grinding... great for cutting guy wire - or - my favorite: cutting through rusted out u-bolts - its a zip - make sure you wear protective eye wear - and if you really want to have fun - use it outside after sunset for the "fireworks" show of hot metal chips shooting off as they are ground away.... My new side grinder - think its Chinese - gets christened tomorrow... K4OJ Jim W7RY wrote: A good sharp cold chisel and an anvil works great too. Just be sure to watch the ends when they let go..... _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TowerTalk] deep base for MA-550, Jim White, K4OJ |
---|---|
Next by Date: | Re: [TowerTalk] How do you cut this stuff?, Jerry Keller |
Previous by Thread: | Re: [TowerTalk] How do you cut this stuff?, Jim W7RY |
Next by Thread: | Re: [TowerTalk] How do you cut this stuff?, Jerry Keller |
Indexes: | [Date] [Thread] [Top] [All Lists] |