On Thu, 16 Oct 2003 05:21:13 -0700 (PDT) dan bookwalter <n8dcj@yahoo.com>
writes:
> Ok... since its fairly obvious that my T2X isnt going
> to work in my TX-472... and i didnt get a good feeling
> about the Yaesu rotors... so i am left with using a
> Ham IV... so anyone have one installed in a Ham IV...
You might check with Rotor Doc to see if his
RD-1800 will fit in there.
http://www.rotor-doc.com/
If you settle on a
Ham-IV, get a new one, or if refurbed, have
them replace the upper housing. After those
4 self-tapping screws have been removed, they
take some aluminum with them, and don't hold
as well as when they are first tapped into a
new housing.
Dave Hachadorian, K6LL
Yuma, AZ
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|