Thats the problem with crankups. Always something.
----- Original Message -----
From: <K7LXC@aol.com>
To: <davidgreer73@yahoo.com>; <towertalk@contesting.com>
Sent: Friday, November 14, 2003 5:25 PM
Subject: Re: [TowerTalk] Crank-up won't crank
> In a message dated 11/14/03 9:50:28 AM Pacific Standard Time,
> davidgreer73@yahoo.com writes:
>
> > I went outside Wednesday evening to crank down my new
> > U.S. Tower 55 ft. tower because of the high winds. It
> > wouldn't crank down or up. Not an inch. I had
> > previously lowered and raised it on several occasions
> > without incident.
>
> Does the motor turn? Can you turn the big belt-driven pulley by hand?
> Will it turn by hand if you take the the belt off?
>
> Cheers,
> Steve K7LXC
> TOWER TECH -
> Authorized US Tower installer
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|