W7NI sells the bolts using the company name "Antronics of Oregon".
73,
John KK9A
[TowerTalk] rohn 45 leg bolts
from [Julio Peralta][Permanent Link][Original]
To: <TOWERTALK@contesting.com>
Subject: [TowerTalk] rohn 45 leg bolts
From: "Julio Peralta" <jperalta@tampabay.rr.com>
Date: Thu, 5 Feb 2004 13:03:18 -0500
List-post: <mailto:towertalk@contesting.com>
The Tampa Amateur Radio Club is getting ready to erect a R-45 tower. We need
8
sets of leg bolts. Rohn specs call for 3 each, 5/16" X 2 3/8" NC bolts and
3
each, 7/16 X 2 1/4" NC bolts per section.
Does any one have any spares on hand?
What does the NC in the spec stand for?
I would guess that any commercial fastener vendor would have suitable bolts.
BTW we also need a rotor shelf for the R-45 to complete the install.
Julio, W4HY
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|