To: | towertalk@contesting.com |
---|---|
Subject: | Re: [TowerTalk] 160m. Inverted L noise |
From: | corneliuspaul@gmx.net |
Date: | Tue, 02 Mar 2004 10:49:42 +0100 |
List-post: | <mailto:towertalk@contesting.com> |
Hi Jose, I guess your "flexible wire" is a multistranded wire ('"litz wire")..? AFAIK multistranded wire can develop the following problem: the individual tiny little wires oxidize on the surface and this oxide film acts as little diodes in between the individual wires, which generates the noise when those little wires rub against each other. might be what is causing the noise on your inv L. of course there is no problem on TXing. I suggest you try putting up the solid wire again and see if the problem goes away... :-( 73s Con DF4SA At 12:36 01.03.2004, op155342c@mail.telepac.pt wrote: Just replaced my 160m. Inverted L old 2.5 mm wire with a 6mm flexible wire _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [TowerTalk] what happened to the $15.50 book, Craig Clark |
---|---|
Next by Date: | [TowerTalk] Aluminum in concrete, Doug Lefever |
Previous by Thread: | Re: [TowerTalk] 160m. Inverted L, Steve |
Next by Thread: | RE: [TowerTalk] 160m. Inverted L noise, Rex Lint |
Indexes: | [Date] [Thread] [Top] [All Lists] |