GUYS:
I WILL LIKE TO KNOW WHAT TYPE OF TRANSMITION AND MOTOR ARE THE BEST TO USE TO
ROTATE A TOWER, I HAVE A FEW PHOTOS OF HOMEBREW ROTORS AND OTHER COMMERCIAL
OUT OF MY BUDGET. I WILL LIKE TO BUILD THIS AT LOW COST BUT HIGH QUALITY ,
FOR THAT REASON I WILL TAKE MY TIME AND LOOK FOR THE RIGHT PARTS.
I FOUND HERE IN A LOCAL JUNK YARD SEVERAL TRANSMITIONS WITH MOTOR IN VERY GOOD
CONDITIONS AND GOOD PRICE 100-150 DLLS COMPLETE , THIS ONES COMES IN A MACHINE
THAT WAS USED IN SOME AGRICULTURAL PROCESS. VERY STRONG AND THE SHAFT IS
AROUND 1 1/8 INCH , THE ONLY PROBLEM IS THIS IS MOUNTED HORIZONTAL. IN THE
LEFT THE MOTOR AND THE RIGHT THE LOW SPEED SHAFT , NOT ABOVE LIKE THE ONE THAT
APPEARS IN THE NCJ THAT HAVE IN USE A CONTEST STATION IN OH0 LAND.
I WILL APRECIATE IDEAS AND YOUR OPPINIONS.
TNX IN ADVANCE
HECTOR XE2K
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|