Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaesu Rotor Interface

To: "Martin Ewing" <martin@aa6e.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Yaesu Rotor Interface
From: "on4kj" <on4kj@skynet.be>
Date: Wed, 2 Jun 2004 00:04:17 +0200
List-post: <mailto:towertalk@contesting.com>
  Why not using a little FPGA little ( Xilinx ) Just draw the chematic and
translate it in a loadable data file. Very funny to work with.

  Jos on4kj


  ----- Original Message ----- 
  From: "Martin Ewing" <martin@aa6e.net>
  To: <towertalk@contesting.com>
  Sent: Sunday, May 30, 2004 8:49 PM
  Subject: [TowerTalk] Yaesu Rotor Interface


  > Dear Gurus,
  >
  > I'm thinking of ordering a Yaesu G-1000DXA rotor, and I see that its
  > GS-232A "computer interface" is a $800+ (list) unit that does not seem
  > to be widely available.  Oh my.  Most of that is a simple A/D
  > converter.  Does anyone have a tip on a cost-effective PC solution?  A
  > PIC chip with its 8-bit A/D has most of what you'd need, although a
  > 10-bit A/D would be better.
  >
  > What do people do for real-life PC-to-rotor applications?  Do any rotors
  > come with digital shaft encoders?
  >
  > 73, Martin
  > www.aa6e.net/aa6e
  >
  > _______________________________________________
  >
  > See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
  >
  > _______________________________________________
  > TowerTalk mailing list
  > TowerTalk@contesting.com
  > http://lists.contesting.com/mailman/listinfo/towertalk
  >
  >


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>