I just purchased a 1000DXA to replace the 800SDX that was fried by a recent
lightning strike. It has been hooked up and tested on the ground. It will
turn a F12 C-4XL.
I have not seen the reviews, but the negatives may be from the fact that the
motor is basically the same for both models, yet the 1000 has a higher price
tag. AFAIK the difference is in braking only, i.e. the 1000 will stop a
bigger beam better, and slip less in high winds.
Keith WD5DXL
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Alan AB2OS
Sent: Wednesday, June 30, 2004 11:15 AM
To: towertalk reflector
Subject: [TowerTalk] Yaesu rotators
I am sure that a Yaesu G-800 would handle what I want to put up, but I
thought that a G-1000 would give a better safety margin. Yet I notice that
the eham reviews rate the G-1000 rotators lower than the G-800 models; the
G-1000 actually received several 5/5 ratings, but the 0/5 and 1/5 ratings
pulled the average way down. Are the bigger ones really so much worse than
the smaller ones?
Opinions? Experiences?
Alan AB2OS
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|