Towertalk
[Top] [All Lists]

Re: [TowerTalk] tic ring in tandem

To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] tic ring in tandem
From: <kk9a@arrl.net>
Date: Tue, 7 Sep 2004 04:42:51 -0000
List-post: <mailto:towertalk@contesting.com>
There is no clockwise stop on the rotor and if you create a hard stop you'll
likely strip the plastic gear inside the motor gearbox.   If  K3LR's
suggestion is to have a chance of working, you would need to use the same
length of wires to each motor and use the same size antenna on both.  Still,
wind and friction will likely be different causing them to go out of sync
eventually.  A method of turning each one individually as suggested to
re-sync would  necessary.   If you are good with electronics it's probably
possible to build a new control that can turn the two motors with two
potentiometers using one setting.    If the stacking distance is close,
perhaps the rings can be connected mechanically.

John KK9A


----- Original Message -----
From: "Tim Duffy K3LR" <k3lr@k3lr.com>
To: "w9ge" <finger@goeaston.net>
Cc: <towertalk@contesting.com>
Sent: Tuesday, September 07, 2004 01:03
Subject: Re: [TowerTalk] tic ring in tandem


Hi Bob!

I have given some thought to this in the past. One suggestion would be to
set both rings (mounted on the tower) to the clockwise stop (180 degrees
south by east). Use the pot wires from only one ring, but parallel the motor
wires for both rings. Now both rings will rotate together and as long as
nothing slips, they will stay in sync. You might want to rig up a 3 pole
double throw relay where you could check the direction of the unused pot
periodically. This is a
simple method that might work well for you.

73!
Tim K3LR

w9ge wrote:

> Has anyone used the db9 port on the back of the tic ring rotator
controller to slave two tic ring rotators?  I have one up and a second would
be far less money than converting the tower to become a rotating tower.  If
you have done so does it work well, and do the rotators pretty much stay in
synch throughout 360 degrees?   I want to stack a pair of yagi's and have no
need to rotate them independently.  Thanks in advance for the observations.
73 bob de w9ge
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>