Re: [TowerTalk] hairpin

[Don Havlicek <n8de@thepoint.net>]

Just measured mine.

The 'loop' is 25.5 inches either side of the boom attachment point, thus 
is 51 inches overall.

The shape is almost a continuous curve from driven element attachment 
point to boom attachment point EXCEPT the first 3 inches [nearest the 
driven element] at quite 'straight' with a bend at the 3 inch point.

Don
N8DE

N4CW@aol.com wrote:
> No dimensions are given in the "Assembly Instructions" sheet that I have. 
> Direct measurements will have to be made.
> Telrex wasn't long on details...,"If you have followed simplified assembly 
> sheet carefully, you are ready to connect your 52 Ohm co-axial to the 'Balun' 
> provided. Mount the antenna in the clear, 34 fet or higher." Also, "Do not 
> force, alter, modify, or try any inventions! Telrex has precision-tuned and matched 
> this antenna to provide optimum 10, 15, and 20 meter gain, F/B ratio, and 
> 'balanced-pattern'."
> No dimensions, other than hardware sizes, are given.
> 73,
> Bert, N4CW/1
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk