G'day,
Pricing on Array Solutions web site for v2.15 is now $79 for the consumer
version. An interesting and significant jump from a "measly $30". If
you're into mega stacks of long boom arrays I guess it's not an issue, for
a couple of 3-4 el jobs, something to think about.
The indications are that it is for Win95/98, however, the demo version
seems to run OK so far in WinXPpro.
Regards,
Mike VP8NO
----- Original Message -----
From: "W0UN -- John Brosnahan" <shr@swtexas.net>
To: "TowerTalk" <towertalk@contesting.com>
Sent: Saturday, January 08, 2005 2:14 PM
Subject: Re: [TowerTalk] kt34xa torque balancing
| There continues to be a LOT of misinformation and overly complex info
| floating around on how to torque balance ANY antenna.
|
| The EASIEST way to do the calculations CORRECTLY is to buy the
| YagiStress program. A "measly" $30 and it does a LOT more. Stop
| guessing and do it right. $30 now may save you thousands in repairs.
|
| http://www.k7nv.com/yagistress/
|
| Or go to http://www.arraysolutions.com/Products/yagistress.htm
| to order.
|
| 73--John W0UN
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|