To: | <msembx-aa6e@yahoo.com>, <towertalk@contesting.com> |
---|---|
Subject: | Re: [TowerTalk] Frozen Rotor |
From: | "W1GOR" <W1GOR@Maine.RR.Com> |
Date: | Wed, 19 Jan 2005 12:18:55 -0500 |
List-post: | <mailto:towertalk@contesting.com> |
Martin, I've had similar problems with the mast freezing in the sleeve... My solution was to make a cone-shaped guard and fasten it around the mast slightly above the sleeve opening (seal it well). It can be of sheet-metal although I used fairly stiff plastic sheet and heated it to form the cone. When done properly, any moisture (rain, snow, sleet) will be diverted away from the mast-sleeve junction and the mast will not freeze in the sleeve. You might want to apply some low temperature silicone grease to the mast, where it passes through the sleeve. Don't use ordinary grease because it is not capable of withstanding very low temperatures without getting stiff. If you have enough space between the mast and sleeve, a sheet of TEFLON can be used in place of the silicone grease. According to DuPont, TEFLON is the slipperiest material on Earth...<grin> By the way, if you can find a GIANT FUNNEL, you will have most of the shield right from the start...! 73, Larry - W1GOR There are 10 types of people in the world; Those that understand B I N A R Y and those that don't. ----- Original Message ----- From: "Martin AA6E" <msembx-aa6e@yahoo.com> To: <towertalk@contesting.com> Sent: Wednesday, January 19, 2005 11:54 AM Subject: [TowerTalk] Frozen Rotor Winter greetings! _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TowerTalk] Frozen Rotor, Alan NV8A (ex. AB2OS) |
---|---|
Next by Date: | FW: [TowerTalk] Frozen Rotor, Ken Kinyon |
Previous by Thread: | Re: [TowerTalk] Frozen Rotor, Alan NV8A (ex. AB2OS) |
Next by Thread: | Re: [TowerTalk] Frozen Rotor, Joe Giacobello |
Indexes: | [Date] [Thread] [Top] [All Lists] |