Re: [TowerTalk] Rotors - your thoughts please.

["Alan NV8A (ex. AB2OS)" <nv8a@att.net>]

I don't have a rotor yet, but I was incling toward the AlfaSpid.

Alan NV8A


On 01/19/05 02:37 pm Lee Buller tossed the following ingredients into 
the ever-growing pot of cybersoup:

> I have a 60 foot 25G tower with a TH6DXX and a HAM III as a Rotor.  I actually have two HAM III rotors...one for a spare...but....
>  
> I am looking to do some tower work this spring and summer and wonder the collective wisdom about getting a different rotor.  These rotors are 20 to 25 years old...they have been rebuilt by Norms at least once...and I wonder if I should go to a different rotor.
>  
> So, what do people like out there?  T2X?  Yaesu?  Stay with what I got?  AlphSpid?
>  
> I can either have mine rebuilt again or go with a T2X that is used....
>  
> I will be getting a new beam but I am not sure what yet....could be a SteppIR 3-element, a C4, or an OPTI-Beam.
>  
> So, what do you all think based on your experience....

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk