[TowerTalk] It''s WORKING!

["K8RI on Tower Talk" <k8ri-tower@charter.net>]

When I answered the note about the frozen rotor I decide to give my "frozen 
rotor" another try as the temperature is up to 28F.  Low and behold, It 
worked!

So, I'm currently turning the thing through a series of turns hoping it gets 
any remaining water out of the motor.

It looks like I'm going to have to build a better cover to keep water out of 
and off of the motor.  I think in addition the investment in about 10 to 15 
feet of armored, self limiting heat tape may be in the future.  It will fit 
nicely between the fins on the motor and with it running through about every 
third gap it should not limit the cooling in Summer.

As the motor has to be mounted horizontally it is possible for a small 
amount of water to collect between the rotor and field magnet poles. If it's 
left to set there and the temperature drops I can see where it could freeze, 
preventing the rotor from turning.

Roger Halstead (K8RI, EN73 & ARRL Life Member)
N833R, World's Oldest Debonair (S# CD-2)
www.rogerhalstead.com 


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk