Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotors - your thoughts please.

To: "Bernard(wtrone)" <wtrone@comcast.net>
Subject: Re: [TowerTalk] Rotors - your thoughts please.
From: Phil Camera <kb9cry@comcast.net>
Date: Wed, 19 Jan 2005 19:58:27 -0600
List-post: <mailto:towertalk@contesting.com>
There is only model of AlfaSpid. The different specs are there and depend on what voltage you feed to it. It'll take anywhere from 12 to 24 volts. The more voltage, the faster it turns and the more torque is gives. Make sense? Phil KB9CRY

Bernard(wtrone) wrote:

Lee:

       I have a HyGain T2X that has been in operation for about 30 years.
All I have ever done to it is replace the "motor" control capacitor in the
shack mounted control box.  For ten years it turned a HyGain TH-7 with a
Cushcraft A3WS ten feet above it.  Haven't had a single problem with it.

       For anyone who has an Alpha Spid, I have a question.  I went to
their website and looked at their specification chart.  I noticed that there
are 3 different Alpha Spid ratings depending on the control voltage.  I
didn't notice any different model numbers, so is the control voltage
selectable?  If not, what are the differences in the three?

TIA.

73,


Bernard, WA4OEJ



----- Original Message ----- From: "Lee Buller" <k0wa@swbell.net>
To: "TowerTalk Reflector" <towertalk@contesting.com>
Sent: Wednesday, January 19, 2005 1:37 PM
Subject: [TowerTalk] Rotors - your thoughts please.





Towertalkians......

I have a 60 foot 25G tower with a TH6DXX and a HAM III as a Rotor. I


actually have two HAM III rotors...one for a spare...but....


I am looking to do some tower work this spring and summer and wonder the


collective wisdom about getting a different rotor. These rotors are 20 to
25 years old...they have been rebuilt by Norms at least once...and I wonder
if I should go to a different rotor.


So, what do people like out there? T2X? Yaesu? Stay with what I got?


AlphSpid?


I can either have mine rebuilt again or go with a T2X that is used....

I will be getting a new beam but I am not sure what yet....could be a


SteppIR 3-element, a C4, or an OPTI-Beam.


So, what do you all think based on your experience....

Lee - K0WA

_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless


Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.


_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk





_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>