Towertalk
[Top] [All Lists]

Re: [TowerTalk] KLM KT34A cleaning

To: l.ferracci@comeca-group.com
Subject: Re: [TowerTalk] KLM KT34A cleaning
From: kb9cry@comcast.net
Date: Mon, 24 Jan 2005 13:27:36 +0000
List-post: <mailto:towertalk@contesting.com>
I strongly support doing the M2 upgrade.  It replaces those plastic linear 
supports with bullet proof aluminum blocks.  Makes the antenna very rugged and 
should last a long time.  Phil  KB9CRY

-------------- Original message -------------- 

> Not a job for the faint of heart......cleaning KLM tubes and straps. 
> 
> What I have found works best, is to use a VERY fine grade of sandpaper inside 
> the curved part of the strap and on the outside of the tube. To make a 
> better electrical connection where the strap contacts the tube I inserted a 
> small 
> short stainless steel screw. Do NOT do this on the capacitor tubes or you may 
> wind up with a short. 
> 
> Another thing you might do is to wrap the fiberglass spacers with electrical 
> tape to minimize the effects of the sun on the fiberglass, or cover it with 
> liquid electrical tape. 
> 
> Or, you can spring for around $300 to buy the upgrade kit from M2, which I 
> have heard is a good investment. 
> 
> Bill K4XS 
> _______________________________________________ 
> 
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless 
> Weather 
> Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions 
> and ask for Sherman, W2FLA. 
> 
> _______________________________________________ 
> TowerTalk mailing list 
> TowerTalk@contesting.com 
> http://lists.contesting.com/mailman/listinfo/towertalk 
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>