Towertalk
[Top] [All Lists]

Re: [TowerTalk] Matching Double Extended Zepp

To: Robert Carroll <rlcarroll@patmedia.net>
Subject: Re: [TowerTalk] Matching Double Extended Zepp
From: Tim Duffy K3LR <k3lr@k3lr.com>
Reply-to: k3lr@k3lr.com
Date: Thu, 24 Feb 2005 21:07:40 -0600
List-post: <mailto:towertalk@contesting.com>
There was a QST article a few years back that gave the matching section 
details. I think it was designed for 15 meters in the write up. This antenna is 
also known as two 5/8 waves in phase.
I scaled the antenna and matching system in the article to 160 meters and put 
it up at about 200 feet. N3RA (WR3G at the time) and I used it in the CQ 160 CW 
contest for an all around great
gain antenna that year before we put up the directional stuff the next year. 
The extended Zepp worked fabulous for US and DX QSOs.

73!
Tim K3LR

http://www.k3lr.com

Robert Carroll wrote:

> Can someone remind me of the length of 450 ohm ladder line required to match
> a double extended Zepp to 50 ohms at 40m?
>
>
>
> Bob W2WG
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any 
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>