Towertalk
[Top] [All Lists]

Re: [TowerTalk] SteppIR gain

To: towertalk@contesting.com
Subject: Re: [TowerTalk] SteppIR gain
From: Kelly Johnson <n6kj.kelly@gmail.com>
Reply-to: Kelly Johnson <n6kj.kelly@gmail.com>
Date: Wed, 16 Mar 2005 11:39:32 -0800
List-post: <mailto:towertalk@contesting.com>
Agreed, but unfortunately wouldn't work for me (and most other people
around here with small lots) because the turning radius would be too
big.  My lot is only 50' wide so fitting a 40m element in 50' would be
tough.  I think a Moxon rectangle would probably meet my needs better
OR a loaded "shorty forty" type element.

I guess you can't please everyone.



On Wed, 16 Mar 2005 11:31:01 -0800, Michael Tope <W4EF@dellroy.com> wrote:
> 
> ----- Original Message -----
> From: "Kelly Johnson" <n6kj.kelly@gmail.com>
> 
> > It is also far less "objectionable" for those of us living in densely
> > populated suburbanneighborhoods with cranky neighbors or "aesthetics
> > conscious" spouses in comparison to something like a C31XR (or even a
> > C3).  For those of us that are "real estate challenged" and living on
> > small suburban lots, the SteppIR is a great option IMO.  I only wish
> > my 3L SteppIR had a 40m element (even just a single element) so I
> > could ditch my inverted vee!!!!
> >
> 
> I have been thinking the same thing, Kelly. I think a 3 element SteppIR
> with 13.9 MHz parastitic elements and a the 6.9 MHz MonsterIR
> driven element would be a big hit. Rotary dipole performance on
> 40 and 30, and 3 element yagi performance on 20, 17, 15, 12, 10.
> Great for a 1/8 to 1/4 acre suburban lot.
> 
> 73 de Mike, W4EF.......................
> 
>
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>