Towertalk
[Top] [All Lists]

Re: [TowerTalk] FW: Moxon rectangles

To: towertalk@contesting.com
Subject: Re: [TowerTalk] FW: Moxon rectangles
From: K4SB <k4sb@bellsouth.net>
Date: Sat, 26 Mar 2005 05:57:09 +0000
List-post: <mailto:towertalk@contesting.com>
> K4SB WROTE
> > However, if you use an electrical 1/2 wave line connected to the
> > antenna, the impedence of the antenna will reflect exactly at the MFJ.
--------
Jim Lux wrote
> Mind you, making a piece of coax that is 180 degrees (or an exact multiple)
> for an entire band is a bit of a challenge.

I did not speak of trying to cover an entire band. By definition, an
electrical 1/2
wave is that at only 1 frequency. 

As a matter of course, every 1/2 wave line I have is cut for 25 kHz up
from the bottom of the band.

Now, does that make everyone happy? Or is there more nitpicking to
come?

73
Ed
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>