K4SB wrote:
> Bill Aycock wrote:
>
>>Ed, I'm shocked- The one route into that thing that CAN'T be shielded but
>>CAN be filtered, is the antenna connection, itself.
>>Bill
>
> ------
> Well, all I can say is that the jumper cables into and out of the unit
> were custom made.
> And when the unit is switched into the circuit in normal use, there is
> a very noticible drop in noise level, often 3 or 4 S units.
Insertion loss?
73
Gary K4FMX
>
> In the few times I've used it, it has performed flawlessly. It was
> just a suggestion which works here.
>
> Obviously, there are a lot of you who are more technically talented
> than I. So, let this be the end of it.
>
> 73
> Ed
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|