To: | towertalk@contesting.com |
---|---|
Subject: | [TowerTalk] Reusing Self Tapping Bolts (was Rotor disassembly) |
From: | "guy driver" <guydriver@msn.com> |
Date: | Sat, 16 Apr 2005 21:58:53 +0000 |
List-post: | <mailto:towertalk@contesting.com> |
There are at least three company's that sell parts and were very helpful with information. Fxrotor and Normsrotor and Rotor Doc (now C.A.T.S.)Good luck While you have the rotor apart a new wiper set and also there is plugs to replace the loose screws in the terminal block. 73 guy wr7k _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [TowerTalk] MonstIR Rotor/tower/polyrod question, EL34GUY |
---|---|
Next by Date: | Re: [TowerTalk] rotating guy collar source?, Bill VanAlstyne, W5WVO |
Previous by Thread: | [TowerTalk] Reusing Self Tapping Bolts (was Rotor disassembly), Roger K8RI on Tower |
Next by Thread: | Re: [TowerTalk] Rotor disassembly, Shannon Boal |
Indexes: | [Date] [Thread] [Top] [All Lists] |