I believe the proper method is given in the Rohn catalog.
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Cqtestk4xs@aol.com
Sent: Thursday, April 28, 2005 2:27 PM
To: w7dra@juno.com
Cc: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] on guying towers
In a message dated 4/28/05 7:19:58 PM Greenwich Standard Time,
w7dra@juno.com
writes:
i always drive
6 foot lengths of 3/4 inch rebar and various angles leaving 8 inches or so
out of the ground for the concrete to hang to. this is to stabilize the
ground around the post.
Not recommended........Eventually the rebar rusts, there is water intrusion,
along the bar into the concrete and you wind up with a mass of flakey,
oxidized rebar. The result is a weaker block of concrete than if you left
the rebar out of the concrete.
Maybe this is not an issue other places, but it sure is in Florida.
Bill K4XS
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|