Wisdom, please: I want to run 1.5 inch copper strap from my SPG
bulkhead to my AC ground point, which is my water service entrance,
following the "bond the grounds together" principle.
Question is what is the best way to transition from the copper strap
to the water pipe, which is maybe 1.5 or 2 inches in diameter? (Don't
know for sure because it's really hard to access in my crawlspace.)
I don't find any commercial products for this scenario. I could rig
something with U bolts or radiator clamps, but what is the group think
here? Is there a problem with copper to steel contacts? Do we
believe in special ointments like "kopper shield"? Etc.
Thanks for your attention.
73 Martin AA6E
--
martin.ewing@gmail.com
http://blog.aa6e.net
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|