Towertalk
[Top] [All Lists]

Re: [TowerTalk] Beefing up Aluminum Beam Elements

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Beefing up Aluminum Beam Elements
From: Dino Darling <k6rix@earthlink.net>
Date: Fri, 08 Jul 2005 12:09:44 -0700
List-post: <mailto:towertalk@contesting.com>
I should have added the following link to download software that will help 
you...

http://www.realhamradio.com/Download.htm

At 08:44 AM 07/08/2005 -1000, you wrote:
>I wonder if anyone has and comments on strengthening beam elements by
>inserting the next size smaller tubing inside the original there-by doubling
>the thickness, but not increasing the outside diameter of the elements..
>     I have a Tennadyne Log that just is not physically strong enough to last
>out here in the wind and ice of Western Kansas.. I plan to increase the
>tubing thickness for the longest two elements for approx the 1st 10 ft out
>from the boom. What I'm wondering is, will this change the loading or SWR of
>the antenna ??   Comments welcome..   Jim / W0HFG
>
>
>_______________________________________________
>
>See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
>Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
>any questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk

Dino...k6rix@earthlink.net 


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>