The manual warns of this problem caused by the use of rigid cast aluminum.
Based on this, I would think Yaesu sells replacement clamps.
73, Keith NM5G
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Malcolm Ringel
Sent: Tuesday, July 12, 2005 8:03 PM
To: TOWERTALK@contesting.com
Subject: [TowerTalk] Yaesu Rotator mast clamps
I have cracked one of the mast clamps on my G1000SDX rotator. Can anyone
verify whether or not the "optional lower mast bracket" (apparently for use
with a non tower mount) is the same as the upper/top clam-shell arrangement
? The sketch in the manual looks identical; anyone in this group know for
certain ?
Many thanks & 73,
Malcolm, K3KZ
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|