I bought the arm in as-is condition so I cannot describe the conditions
of failure.
My goal is to repair the damage and to reinforce the arm so that
future potential for failure is rendered improbable.
doc
Bill Aycock wrote:
> Doc- It seems that this unit was "overloaded". The Rohn foldovers come in
> various length combinations. What was the assembly set-up? (ie, how many
> feet below and above the Hinge) What was the load on top?
> From your previous posts, I am not clear that this tower was done
> according to the Specs.
> Bill
>
> At 01:54 PM 8/20/2005 -0400, doc wrote:
>>I have posted four pictures of my Rohn 45 tiltover arm in need
>>of repair: http://www.bibleseven.com/ant.html
--
Thanks! & 73, doc kd4e
|_|___|_|
| | & | |
{|
/\ {|
/ \ {|
/ \ {|
/ @ \ {|
| |~_|~~~~|
| -| | |
============\ # http://bibleseven.com/kd4e.html
KD4E =========================================
West Central Florida
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|