Towertalk
[Top] [All Lists]

Re: [TowerTalk] Anchor Bolt Grade Suitable for Tower Base?

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Anchor Bolt Grade Suitable for Tower Base?
From: K4BEV@aol.com
Date: Wed, 14 Sep 2005 09:45:35 EDT
List-post: <mailto:towertalk@contesting.com>
 
In a message dated 9/14/05 8:30:28 A.M. Central Daylight Time,  
jimlux@earthlink.net writes:

They  literally cannot afford to do any process controls or  inspections.




On a job in mainland China about 10 years ago a load of structural steel  was 
being brought into the building on a forklift. The forklift hit a bump and  
dumped the load maybe 3 feet onto concrete. Most of the I-Beams were ok, but  
some shattered and others bent!
Hopefully they have improved their metallurgical inspections since then,  but 
I still avoid Chinese steel. Problem is - its hard to know where the stuff  
came from.
 
73, Don - K4BEV
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>