Scott:
I have a similar connection between the coax balun and the connection
point on my Bencher Skyhawk triband Yagi. I posted something to TowerTalk at
that time:
http://lists.contesting.com/archives//html/Towertalk/2002-10/msg00391.html .
Hope this helps.
73 de
Gene Smar AD3F
> I recently acquired a Hygain 6m yagi. It uses an open-wire coax feed (coax
> connected to two screw terminals). I'm concerned about corrosion and water
> ingress in the coax. What is the best technique to secure these
> connections? Are there any products that will limit water from wicking up
> the coax?
>
> Thanks,
>
> Scott N7SS
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather
> Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
> and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|