Towertalk
[Top] [All Lists]

Re: [TowerTalk] Digging a tower foundation hole

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Digging a tower foundation hole
From: Bob Gates <regates@direcway.com>
Date: Fri, 23 Sep 2005 02:20:03 -0700
List-post: <mailto:towertalk@contesting.com>
TTers,

I happen to totally agree with Hector.  The "day laborers" Steve referred to 
are hard working men trying desperately to support their families.  Politics 
aside, I feel that the terminology was beyond politically incorrect, and I feel 
that an apology is in order.  No "Cheers" in that message.

73, Bob W7BJ 
  ----- Original Message ----- 
  From: J. Hector Garcia XE2K 
  To: K7LXC@aol.com ; towertalk@contesting.com ; n6kj.kelly@gmail.com 
  Sent: Thursday, September 22, 2005 9:39 PM
  Subject: Re: [TowerTalk] Digging a tower foundation hole


  Steve

  I'm Mexican ,  it will be a pleasure charge you $100.00 dlls hourly just to  
be in your house to see your hole diggin process and say how to do it 

  NOT ALL THE  Mexicans  that are around  are cheap or have no work

  BETTER  OPTION , BRING YOUR OWN PEOPLE FROM  LA OR MS  TO HELP YOU , I JUST 
READ 200,000  HAVE NO WORK ,  HELP AN AMERICAN  GIVE A JOB
   



  On 22 Sep 2005 19:51 PDT you wrote:

  > In a message dated 9/22/2005 3:02:31 PM Pacific Daylight Time, 
  > towertalk-request@contesting.com writes:
  > 
  > >>  Maybe I will be able to get a bobcat back there. It's not the width I'm
  > worried about, but rather height. It would need to be less than 6 or 7 feet
  > tall in order to fit under a "lean-to" that is permanently attached to one
  > side of the house. I'll look into small bobcats or a hand auger. That sounds
  > like the best plan.
  > 
  >     I rented a little excavator that had movable treads (it might've been a 
  > Bobcat). They retracted to around 48" I think - it was enough to drive it 
  > through the gate in the fence anyway - and then extended a foot or so for 
the 
  > needed stable platform when we got back to the digging site.
  > 
  >     Also, you're in California - hire some Mexicans. There are always lots 
  > hanging around your local hardware store/lumber yard and are willing to 
work. 
  > The latest I paid was $12 per hour in Santa Cruz. Cheaper than Labor Ready, 
et 
  > al. 
  > 
  > Cheers,
  > Steve     K7LXC
  > TOWER TECH -
  > Professional tower services for commercial and amateur (until the end of 
the 
  > year, anyway)
  > Cell: 206-890-4188
  > _______________________________________________
  > 
  > See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any 
questions and ask for Sherman, W2FLA.
  > 
  > _______________________________________________
  > TowerTalk mailing list
  > TowerTalk@contesting.com
  > http://lists.contesting.com/mailman/listinfo/towertalk

  _______________________________________________

  See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any 
questions and ask for Sherman, W2FLA.

  _______________________________________________
  TowerTalk mailing list
  TowerTalk@contesting.com
  http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>