Gary
Look here
http://www.burghardt-amateur.com/Burghardt/HTML/main_frame.html Click
New Product Search and then click the Phillystran logo. You'll find the
installation instructions.
73 de Jim Smith VE7FO
StellarCAT wrote:
>I have always used cable clamps ... but this time around the preforms were
>about as cheap as
> the cable clamps. I have researched here there and (most) everywhere but
> cannot find clear
>cut instructions on how to use these things. Is the guy simply cut and held
>straight and the preform
>simply wraps around it!? The guy could theoretically "pull" put with enough
>force - i.e. it is not
>hooked/looped or anything else?
>[I know, like a Chinese finger lock that the more you pull the more they
>"grip"...BUT]
>
>Is there any "magic" to it or any caveats? Both with the guys using thimbles
>(i have the right size
>thimbles) as well as around insulators?
>
>thanks for any help.
>
>Gary Myers
>K9RX
>
>_______________________________________________
>
>See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
>Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
>questions and ask for Sherman, W2FLA.
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|