Phyllistran must be under tension when putting on the grip. I hook the
thimble to anything handy that is solid, like a bench vise handle or bumper
hitch and have the XYL or other helper pull as hard as possible on the free
end. You cannot put them on without tension on the "cable" 73 bob de w9ge
----- Original Message -----
From: <Cqtestk4xs@aol.com>
To: <TOWERTALK@contesting.com>
Sent: Wednesday, September 28, 2005 10:21 AM
Subject: [TowerTalk] Wrapping Phillystran with grips
> Wrapping Philly preforms is more of a challenge for me than regular EHS
> preforms. I have found that wrapping the Philly a couple of times with
> either the
> short or long side and then putting that end with the thimble in a vise
> and
> then begin wrapping one end and then the other a couple of times, so the
> Philly
> doesn't 'bulge' out messing up the wrap. It also helps to pull on the
> loose
> end of the Philly occasionally.
>
> I have found wrapping one side all the way and then the other makes for a
> lot
> of work.
>
> I hope this helps.
>
> Bill K4XS
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|