Towertalk
[Top] [All Lists]

Re: [TowerTalk] Centre Insulator - fiberglass or Garolite rod

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Centre Insulator - fiberglass or Garolite rod
From: Randy <randy@verizon.net>
Date: Thu, 29 Sep 2005 21:43:11 -0500
List-post: <mailto:towertalk@contesting.com>
At 08:26 AM 9/29/2005, you wrote:
><snip>
> >Thanks for the extra info. I'll bet the dust is hazardous, too!
>
>irritant mostly... Wear long sleeves and gloves and a dust mask.. You'll
>itch for days regardless.

I have no "scientific" proof that these things work, but I'd bet on it:

Re: fiberglass dust, etc....
1) rub exposed skin with cornstarch prior to generating or being exposed to
     any dust, the theory being that filling up skin pores with cornstarch 
inhibits
     filling them up with 'glass dust. If it only lasts 5 minutes before 
sweat drains
     it off, that's 5 minutes less of the evil crud in you.
2) When done, wrap one hand with Duct tape, with the adhesive facing OUT,
     i.e. "inside-out", and roll it over exposed skin, hopefully removing 
some of
     the irritant dust.
3) Then, take a C-O-L-D shower, the idea being to get the crud off of you 
without
     giving the pores a reason to open up and allow the 'glass to get in.

The first six weeks immediately following high-school were at a local boat
manufacturing plant, and I had a *lifetime* of itch in that period.

73
Randy
KZ4RV 


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>