Towertalk
[Top] [All Lists]

Re: [TowerTalk] [Amps] alpha 87a and Pro II question

To: "TowerTalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] [Amps] alpha 87a and Pro II question
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Wed, 12 Oct 2005 09:32:14 -0500
List-post: <mailto:towertalk@contesting.com>
John W0UN wrote:
>I can't speak for other rigs, but I assume most of the high-end Icoms
behave the same way.

I use the IC-775DSP with 87A built in 1995 and later upgraded with Alphamax.
No alc connection has ever been used.  The only fault ever produced is when
I forget to turn down the power level on the 775 which over-excites the amp.
:)

Speaking of over-exciting, I often wonder what the 87A would put out if the
auto-fault did not engage when driving with 200 watts.  Do you suppose it
would melt the plates?

73, Keith NM5G

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>