Oops, posted to wrong list - sri.
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Keith Dutson
Sent: Wednesday, October 12, 2005 9:32 AM
To: TowerTalk
Subject: Re: [TowerTalk] [Amps] alpha 87a and Pro II question
John W0UN wrote:
>I can't speak for other rigs, but I assume most of the high-end Icoms
behave the same way.
I use the IC-775DSP with 87A built in 1995 and later upgraded with Alphamax.
No alc connection has ever been used. The only fault ever produced is when
I forget to turn down the power level on the 775 which over-excites the amp.
:)
Speaking of over-exciting, I often wonder what the 87A would put out if the
auto-fault did not engage when driving with 200 watts. Do you suppose it
would melt the plates?
73, Keith NM5G
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|