Towertalk
[Top] [All Lists]

## Re: [TowerTalk] FW: 135 degrees phasing.

 To: "Rex Lint" , , Re: [TowerTalk] FW: 135 degrees phasing. "Jerry Muller" Thu, 20 Oct 2005 12:27:57 -0400
 ```Exactly Rex. It gets interesting if he's cutting the cables for electrical length instead of by physical length. If he's doing electrical length by looking for a point where they're (n+1)/4 wavelengths long, he can just change the frequency that he uses to find the null. I usually do mine by electrical length. It takes out the slight differences. 73, Jerry K0TV ----- Original Message ----- From: "Rex Lint" To: ; Sent: Thursday, October 20, 2005 9:06 AM Subject: Re: [TowerTalk] FW: 135 degrees phasing. > Joe, > > Why wouldn't you just add half of a 1/4 wave to a 1/4 wave? 90 degrees > plus > 43 degrees - 135 degrees. > > Rex - K1HI > Merrimack > > -----Original Message----- > From: towertalk-bounces@contesting.com > [mailto:towertalk-bounces@contesting.com] On Behalf Of Jose M. Valdes R. > YV5LIX > Sent: Tuesday, October 18, 2005 8:51 PM > To: towertalk@contesting.com > Subject: [TowerTalk] FW: 135 degrees phasing. > > Hello, > > I'm getting ready for the next CQWW SSB contest and I'm working in phasing > 2 > 1/4 wave verticals for 75 meters and all simulations shows that best gain > is > obtained with 135 degrees phasing, but I would like to know how to obtain > 135 degrees phasing with the length of the phasing lines; 90 degrees is > easy > because it uses 1/4 wave electrical length for the phasing lines, which > can > be calculated using the velocity factor of the lines used, but 135 is not > as > easy. > > I can obtain 90 degrees phasing using two 1/4 wave RG-11 and one 1/4 wave > RG-8 for the phasing that will be switched using 2 relays, but 135 degrees > is another story. > > 73/DX Jose M. Valdes R. (Joe) YV5LIX > eQSL.cc Advisory Board Member > QSL manager EA7FTR > SYSOP YV5LIX DX Cluster > telnet://yv5lix.org.ve:7300 > VHF Packed: 145.430 YV5LIX > http://www.yv5lix.org.ve > > > > > > _______________________________________________ > > See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless > Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with > any > questions and ask for Sherman, W2FLA. > > _______________________________________________ > TowerTalk mailing list > TowerTalk@contesting.com > http://lists.contesting.com/mailman/listinfo/towertalk > > _______________________________________________ > > See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless > Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with > any questions and ask for Sherman, W2FLA. > > _______________________________________________ > TowerTalk mailing list > TowerTalk@contesting.com > http://lists.contesting.com/mailman/listinfo/towertalk _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk ```
 Current Thread [TowerTalk] FW: 135 degrees phasing., Jose M. Valdes R. YV5LIX Re: [TowerTalk] FW: 135 degrees phasing., Rex Lint Re: [TowerTalk] FW: 135 degrees phasing., Jerry Muller <= Re: [TowerTalk] FW: 135 degrees phasing., Joe Subich, W4TV Re: [TowerTalk] FW: 135 degrees phasing., Jose M. Valdes R. YV5LIX Re: [TowerTalk] FW: 135 degrees phasing., Rex Lint Re: [TowerTalk] 135 degrees phasing., Terry Conboy Re: [TowerTalk] FW: 135 degrees phasing., Tom Rauch