Joe,
Why wouldn't you just add half of a 1/4 wave to a 1/4 wave? 90 degrees plus
43 degrees - 135 degrees.
Rex - K1HI
Merrimack
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jose M. Valdes R.
YV5LIX
Sent: Tuesday, October 18, 2005 8:51 PM
To: towertalk@contesting.com
Subject: [TowerTalk] FW: 135 degrees phasing.
Hello,
I'm getting ready for the next CQWW SSB contest and I'm working in phasing 2
1/4 wave verticals for 75 meters and all simulations shows that best gain is
obtained with 135 degrees phasing, but I would like to know how to obtain
135 degrees phasing with the length of the phasing lines; 90 degrees is easy
because it uses 1/4 wave electrical length for the phasing lines, which can
be calculated using the velocity factor of the lines used, but 135 is not as
easy.
I can obtain 90 degrees phasing using two 1/4 wave RG-11 and one 1/4 wave
RG-8 for the phasing that will be switched using 2 relays, but 135 degrees
is another story.
73/DX Jose M. Valdes R. (Joe) YV5LIX
eQSL.cc Advisory Board Member
QSL manager EA7FTR
SYSOP YV5LIX DX Cluster
telnet://yv5lix.org.ve:7300
VHF Packed: 145.430 YV5LIX
http://www.yv5lix.org.ve
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|