I've done just that using fiberglass rod to insulate the tower from the
base.
The rod is available in all diameters, so you should be able to find the
right size.
Just drill holes through the rod that will match the holes in your tower
legs and base ... and put the tower up!
Depending on the base you use, you might want to put a few dacron guy
lines on the tower to eliminate any possible destruction in winds.
Good luck
Don
N8DE
david oneill wrote:
> DOSE ANY ONE OUT THERE HAVE PLANS OR WORKING MODEL TO INSULATE A TOWER FROM
> GROUND?I WANT TO USE A HEIGHTS ALUMINUM TOWER FOR A 80 MTR.VERTICAL.
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
> questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|