The Mosley TD-2W is a commercial example of what you are looking for. I had
the three band version (TD-3W), which covered all three WARC bands with a
single trap assembly. The -2W I am sure is similar.
See http://www.mosley-electronics.com/page%20files/amateur.htm
You could build an equivalent using telescoping tubing and a home made trap.
You can model the thing with AO (as I did) or other modeling programs to
find out what the trap neds to be and where to place it.
Bob, W5LT
-----Original Message-----
From: James Sullivan [mailto:jims@psws.com]
Sent: Friday, April 07, 2006 1:55 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Looking for 12M and 17M rotating Dipole ideas
I want to construct a rotating dipole for 24Mhz and 18Mhz with a single feed
line.
Does any one have any construction details, experience, ideas....
It could be made using traps or separate elements on a very short boom.
The one feedline and rotating capbility are the main requirements
Jim W7EJ
---
[This E-mail Scanned for viruses by Online Northwest]
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|