Hello Paul,
Nearby the same upset here.
I use an old plastic paint bucket upside down.
All for nearby nothing, drip loop included ....hi hi
The best solution I found to keep water out of the conduit.
Good luck.
Jos on4kj os5n
-----Message d'origine-----
De : towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] De la part de Paul Ferguson
Envoyé : samedi 15 juillet 2006 17:55
À : TOWERTALK@contesting.com
Objet : [TowerTalk] Sealing cables at PVC exit?
I am using buried 4-inch PVC pipe to run coax and control cables from
shack to tower base. The PVC come out of the ground, turn horizontal,
and end a foot or two above the tower base. The cables will exit the
PVC, take a small drip loop, and get routed onward.
What is the best way to seal the end of the PVC around the cables? I
thought about using a PVC end cap and drilling holes, but adding a
future cable would be difficult. I am interested in hearing what
creative solutions others have found.
73,
Paul
K5ESW
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|