Towertalk
[Top] [All Lists]

Re: [TowerTalk] RFI Radius vs Ant Height

To: "Mike Brown" <k9mi@sbcglobal.net>
Subject: Re: [TowerTalk] RFI Radius vs Ant Height
From: Bill Turner <dezrat@copper.net>
Reply-to: dezrat@copper.net
Date: Wed, 02 Aug 2006 21:06:45 -0700
List-post: <mailto:towertalk@contesting.com>
ORIGINAL MESSAGE:

On Thu, 3 Aug 2006 02:10:40 -0000, you wrote:


>Are you saying you cause RFI to 60 or 70 homes? Am I missing something here?
>
>Mike K9MI

------------ REPLY SEPARATOR ------------

Easily, at that power level. 

If you've never operated high power, you will be surprised to find
there is a threshold level for RFI which does not work in the
amateur's favor when increasing power. Relatively small increases in
power can cause great increases in RFI. 

Of course the opposite is true too, but his question was about going
from low power to high.

Bill, W6WRT
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>